| 平板硫化机加热系统的维护保养 |
| 添加时间：2019/10/19 16:11:09 浏览次数： |
| 平板硫化机加热系统的维护保养对于用蒸汽加热的硫化机，应保持蒸汽管路畅通。新安装的设备，由于管路或多或少会有杂质，故需每周检查疏水阀，看是否有异物堵塞而影响排除冷凝水的情况。对于电加热硫化机，应定期检查(一般为半年1 次)控温仪表的准确性，检查电热器接线状况是否良好，电热器是否断路等。对于热板电热器罩壳，在模具进出时不要与其碰撞，以免使罩壳带电而发生安全事故。 Maintenance of heating system of flat curing press for curing press heated by steam, keep the steam pipeline unblocked. For the newly installed equipment, since there are more or less impurities in the pipeline, it is necessary to check the drain valve every week to see whether there is blockage of foreign matters affecting the removal of condensate. For the electric heating vulcanizer, the accuracy of the temperature control instrument shall be checked regularly (generally once every half a year), and whether the wiring of the electric heater is in good condition, whether the electric heater is open circuit, etc. For the cover of hot plate electric heater, do not collide with the cover when the mold is in and out, so as to avoid the safety accident caused by electrification of the cover. |
| 上一页 橡胶预成型机是一种高精度高效率制橡胶胶坯设备 |
| 下一页 橡胶注射成型机基本结构 |
Copyright © 技术支持：遨游网络